Homemade Solder Oven / Heat Plate for SMD Component Soldering and useful Chemicals

DIY Solder Oven/Heat Plate for SMD component soldering - Single Side PCB

• Any number of stacked PCB 4 layer PCB/ 6 layer PCB etc

• Single side components only shall be soldered with DIY setup

• Other side may have hand soldering components

Parts for DIY heat plate

1. Regular cloth Iron heating plate

2. Solid-state Relay 13A or mechanical 230VAC 13 A relay

3. Pid controller for temperature sensor

1. An Arduino based or inexpensive PID controller shall be used

4. Thermocouple temperature sensor 

Or PCB hot plates available online

Solder Fume Extractor

SMD PCB Soldering and PCB cleaning Equipment and Chemicals 

BGA Solder Paste Flux Syringe

• RELIFE RL-403 BGA Solder Paste Flux Syringe 10CC 183 degrees Sn63/Pb37 20-38um no-clean Lead Soldering Paste

• https://www.aliexpress.com/item/33057598049.html

Flux Remover for PC Boards

• https://www.circuitspecialists.com/4140-400g.html

• https://www.techspray.com/how-to-clean-flux-from-under-low-stand-off-qfn-components

Flux-removers spray 

• https://asia.chemtronics.com/flux-remover

• https://www.youtube.com/watch?v=-rCS8WnMjV0

Conductive Pens- to repair broken paths on PCB 

• https://asia.chemtronics.com/circuitworks-conductive-pen

Repair a PCB crack or open area of the solder resist on a PCB

Conformal Coating Remover Pen

Flux remover pen

Protect PCB from ESD while reworking

ESD free handguard spray

References

• https://asia.chemtronics.com/
• https://www.techspray.com/